Support homeIn Situ Gene ExpressionDocumentationAssay
Supported Thermal Cyclers

Supported Thermal Cyclers

Supported thermal cyclers for Xenium workflows

This information was previously located in the Thermal Cycler Recommendations for 10x Genomics Single Cell and Spatial Protocols Technical Note CG000571. Also see
Supported thermal cyclers for Chromium Single Cell workflows
Supported thermal cyclers for Visium workflows

Thermal CyclerPart NumberXenium v1Xenium Prime
Analytik Jena Biometra TAdvanced 96 S †846-x-070-251
Analytik Jena Biometra TAdvanced 96 SG †846-x-070-241
Eppendorf Mastercycler X50s ‡6311000010
Eppendorf Mastercycler X50a ‡6313000018
BioRad PTC Tempo Deepwell12015392
ThermoFisher VeritiPro ¶A48141
VWR XT96 Gradient §76452-153
MJ Research PTC-200 (discontinued)05434-05
-
BioRad C1000 (discontinued)1851197
ThermoFisher Veriti (discontinued)4375786
-
Eppendorf Mastercycler Pro (discontinued)950030010
-
-

Table legend

Supported

Not supported

- Not tested

Footnote

† Analytik Jena Biometra TAdvanced 96 S/SG: 2°C/sec ramp rates for both heating and cooling. x in part number = 2 for 230 V; 4 for 115 V; 5 for 100 V, 50-60 Hz

‡ Eppendorf Mastercycler X50s/X50a: 3°C/sec ramp rate for heating and 2°C/sec ramp rate for cooling

¶ ThermoFisher VeritiPro requires FW 1.2.0 and "Cover Ramping" enabled

§ VWR XT96 Gradient: Tips and best practices for this thermal cycler available here.

Document Type
Specifications

Last Modified
August 12, 2024