Support homeCell RangerAnalysis
Cell Multiplexing with Cell Ranger multi (3' Single Cell Gene Expression Kit)

Cell Multiplexing with Cell Ranger multi (3' Single Cell Gene Expression Kit)

Choose a product below to filter the page content to your needs:

Single Cell Gene Expression
Single Cell Immune Profiling
Single Cell Gene Expression Flex

Cell Ranger 6.0 and later supports analyzing 3' Cell Multiplexing data with the cellranger multi pipeline.

The cellranger multi pipeline is required to analyze 3' Cell Multiplexing data. Otherwise, users can continue to use cellranger count.

3' GEX3' FBCellPlexUse multi?
YesYesYesRequired
YesYesNoOptional (alternative: cellranger count)
YesNoYesRequired
YesNoNoOptional (alternative: cellranger count)
NoYesNoOptional (alternative: cellranger count)
The Cell Ranger multi pipeline supports the analysis of cell multiplexed data (e.g., CellPlex). While custom tags are not supported by 10x Genomics, Cell Ranger is capable of analyzing cell multiplexed data using custom tags (such as TotalSeq™-A/B/C). Please see the CMO Reference section for details.

First, generate FASTQ files. For example, if the flow cell ID was HAWT7ADXX, then cellranger mkfastq will output FASTQ files in HAWT7ADXX/outs/fastq_path. If you are already starting with FASTQ files, you can skip this step and proceed directly to run cellranger multi.

Running cellranger multi requires a config CSV, described below, invoking the following arguments:

ArgumentDescription
--idA unique run ID string: e.g. sample345 that is also the output folder name. Cannot be more than 64 characters.
--csvPath to config CSV file with input libraries and analysis parameters.

The multi config CSV contains both the library definitions and experimental design variables. It is composed of up to four sections for 3' data:

  • The [gene-expression] section has two columns that specify parameters relevant to analysis of gene expression data, such as reference genome and cell-calling parameters, as well as other all-purpose parameters.
  • The [feature] section has two columns that specify parameters relevant to analysis of Feature Barcode libraries.
  • The [libraries] section has three required columns that specify where the input FASTQ files may be found.
  • The [samples] section has two required columns that specify sample information for Cell Multiplexing.

Go to the Cell Ranger Multi Config CSV page for a complete list of options for each section.

In Cell Ranger 7.0 and later, the expected number of cells can either be auto-estimated or specified with expect-cells (e.g., to replicate a previous analysis). If needed, automated cell calling can be overridden with the force-cells option. See Gene Expression algorithm overview for details.

Generate a multi config CSV template by running cellranger multi-template, see usage here.

Example formats for different product configurations are below. Example multi config CSVs can be downloaded from Single Cell Gene Expression with Cell Multiplexing public datasets.

After determining these input arguments, run cellranger multi (customize code with relevant file path and ID name):

cd /home/jdoe/runs cellranger multi --id=sample345 --csv=/home/jdoe/sample345.csv

Following a series of checks to validate input arguments, cellranger multi pipeline stages will begin to run:

Martian Runtime - v4.0.8 Running preflight checks (please wait)... ...

By default, Cell Ranger will use all of the cores available on your system to execute pipeline stages. You can specify a different number of cores to use with the --localcores option; for example, --localcores=16 will limit Cell Ranger to using up to sixteen cores at once. Similarly, --localmem will restrict the amount of memory (in GB) used by Cell Ranger.

The pipeline will create a new folder named with the run ID you specified using the --id argument (e.g. /home/jdoe/runs/sample345) for its output. If this folder already exists, Cell Ranger will assume it is an existing pipestance and attempt to resume running it.

A successful cellranger multi run should conclude with a message similar to this:

Waiting 6 seconds for UI to do final refresh. Pipestance completed successfully! yyyy-mm-dd hh:mm:ss Shutting down. Saving pipestance info to "tiny/tiny.mri.tgz"

The outputs of the pipeline will be contained in a folder named with the run ID you specified (e.g. sample345). The subfolder named outs/ will contain the main pipeline outputs.

Here are a few example multi config CSVs for some common product configurations, along with simplified diagrams for the corresponding experimental set up. Replace /path/to with the absolute path to your data, and customize the text according to the experiment's sample, library, and file names. Ensure that the multi config is saved in CSV format with the CSV extension.

See example dataset

[gene-expression] reference,/path/to/transcriptome create-bam,true [libraries] fastq_id,fastqs,feature_types gex1,/path/to/fastqs,Gene Expression mux1,/path/to/fastqs,Multiplexing Capture [samples] sample_id,cmo_ids sample1,CMO301 sample2,CMO303

See example dataset. Note usage of the | to separate CMO tags. Learn more about when to use multiple CMOs per sample here.

[gene-expression] reference,/path/to/transcriptome create-bam,true [libraries] fastq_id,fastqs,feature_types gex1,/path/to/fastqs,Gene Expression mux1,/path/to/fastqs,Multiplexing Capture [samples] sample_id,cmo_ids sample1,CMO301|CMO302 sample2,CMO303|CMO304

The additional Feature Barcode library in this config CSV example ([libraries] section) is Antibody Capture. Specify CRISPR Guide Capture as the feature_types for CRISPR Feature Barcode experiments.

[gene-expression] reference,/path/to/transcriptome create-bam,true [feature] reference,/path/to/feature_reference.csv [libraries] fastq_id,fastqs,feature_types gex1,/path/to/fastqs,Gene Expression abc1,/path/to/fastqs,Antibody Capture mux1,/path/to/fastqs,Multiplexing Capture [samples] sample_id,cmo_ids sample1,CMO301 sample2,CMO303

The cmo-set option in the [gene-expression] section of the multi config CSV allows you to provide a reference for custom Cell Multiplexing oligos (e.g., antibody TotalSeq™-A/B/C tags). The design of this reference is nearly identical to the Feature Barcode Reference used to describe Feature Barcodes, with one difference: the feature_type is required to be Multiplexing Capture instead of those feature types supported in the Feature Barcode reference. The id column may contain alphanumeric, underscore, and hyphen characters. Special characters are generally prohibited, except for the pipe (|) character which can only be used to separate multiple CMO IDs from the same sample in config CSV.

For example, Cell Ranger's default CMO reference looks like this (built into Cell Ranger):

id,name,read,pattern,sequence,feature_type CMO301,CMO301,R2,5P(BC),ATGAGGAATTCCTGC,Multiplexing Capture CMO302,CMO302,R2,5P(BC),CATGCCAATAGAGCG,Multiplexing Capture CMO303,CMO303,R2,5P(BC),CCGTCGTCCAAGCAT,Multiplexing Capture CMO304,CMO304,R2,5P(BC),AACGTTAATCACTCA,Multiplexing Capture CMO305,CMO305,R2,5P(BC),CGCGATATGGTCGGA,Multiplexing Capture CMO306,CMO306,R2,5P(BC),AAGATGAGGTCTGTG,Multiplexing Capture CMO307,CMO307,R2,5P(BC),AAGCTCGTTGGAAGA,Multiplexing Capture CMO308,CMO308,R2,5P(BC),CGGATTCCACATCAT,Multiplexing Capture CMO309,CMO309,R2,5P(BC),GTTGATCTATAACAG,Multiplexing Capture CMO310,CMO310,R2,5P(BC),GCAGGAGGTATCAAT,Multiplexing Capture CMO311,CMO311,R2,5P(BC),GAATCGTGATTCTTC,Multiplexing Capture CMO312,CMO312,R2,5P(BC),ACATGGTCAACGCTG,Multiplexing Capture

The default CMO reference above is available as a downloadable CSV.

The barcode-sample-assignment option in the [gene-expression] section of the multi config CSV allows users to provide a file that manually specifies the barcodes for each sample. It will override Cell Ranger's default cell calling and tag calling steps, and may be useful in cases where data with microfluidic failures can be partially rescued. This feature allows users to import custom tag calling done via 3rd party tools as well (see the Tag assignment of 10x Genomics CellPlex data using Seurat's HTODemux function Analysis Guide for help).

Here is an example multi config CSV:

[gene-expression] reference,/path/to/transcriptome barcode-sample-assignment,/path/to/barcode_sample_assignment.csv create-bam,true [libraries] fastq_id,fastqs,feature_types gex1,/path/to/fastqs,Gene Expression mux1,/path/to/fastqs,Multiplexing Capture [samples] sample_id,cmo_ids sample1,CMO301 sample2,CMO303

The barcode-sample CSV file has at most two columns, one for the barcode sequence and another that is either the sample ID or the tag assignment. A barcode can only be assigned to one sample; barcodes with multiple sample or tag entries will result in an error in Cell Ranger. Here are two examples:

Option 1: Assign to samples

Barcode,Sample_ID ACGTACGTACGTACGT-1,Jurkat CGTACGTACGTACGTA-1,Raji GTACGTACGTACGTAC-1,Jurkat TACGTACGTACGTACG-1,Raji ...

Option 2: Assign to tags

Barcode,Assignment ACGTACGTACGTACGT-1,CMO1 CGTACGTACGTACGTA-1,Multiplet GTACGTACGTACGTAC-1,Blank TACGTACGTACGTACG-1,Unassigned ...